Most modern routers allow you to backup the configuration of the router into a file, and then restore the configuration from the file when it's needed.
The backup file of the router usually contains important data like your ISP user name/password, the login password of the router, and wireless network keys.
If you lost one of these password/keys, but you still have a backup file of your router configuration, RouterPassView might help you to recover your lost password from your router file.
For now, RouterPassView supports a limited number of router models, and I'll gradually add support for more routers in future versions. Also, be aware that even if your router is not in the list, you can still try to open your router backup file with RouterPassView, because some routers are sold with different brand name, but they still use the same software/chipset of other routers. Here's the list:
After running RouterPassView, you can open your router configuration file by using 'Open Router Config File' option (Ctrl+O) or by dragging the config file from Explorer into the main window of RouterPassView.
If RouterPassView manage to detect and decrypt your router file, you should get a list of passwords/wireless keys in the main window of RouterPassView. If RouterPassView cannot detect your file, it'll remain empty.
In these modes, RouterPassView decrypts the router file, but display it "as is" without analyzing the data stored in it.
The backup file of the router usually contains important data like your ISP user name/password, the login password of the router, and wireless network keys.
If you lost one of these password/keys, but you still have a backup file of your router configuration, RouterPassView might help you to recover your lost password from your router file.
System Requirements
- This utility works on any version of Windows, starting from Windows 2000 and up to Windows 7.
- RouterPassView supports limited number of router models.
Supported Routers
Due to large amount of router models available in the market, it's impossible to support all of them.For now, RouterPassView supports a limited number of router models, and I'll gradually add support for more routers in future versions. Also, be aware that even if your router is not in the list, you can still try to open your router backup file with RouterPassView, because some routers are sold with different brand name, but they still use the same software/chipset of other routers. Here's the list:
- Linksys WRT54GL (With original firmware or Tomato firmware), WRT54G (only some of them), WRT160N, WRT320N, and possibly similar models.
- Edimax BR6204WG, and possibly similar models.
- Siemens ADSL SL2-141, and possibly similar models.
- Dynalink RTA1025W, and possibly similar models.
- NETGEAR WGT624, and possibly similar models.
- ASUS WL-520g, WL-600g, and possibly similar models.
- ASUS RT-N10+ , and possibly similar models.
- Asus RT-N56U , and possibly similar models.
- D-Link DIR-655, DIR-300, and possibly similar models.
- Sanex SA 5100, and possibly similar models.
- Sitecom WL-351, WL-575, WL-312, and possibly similar models.
- COMTREND 536+ (Only Internet Login)
- US Robotics 9108 ADSL (internet login and admin login)
- D-Link DSL-2540U/BRU/D ADSL2+, DSL-2650U, DSL-520B
- D-Link DVA-G3170i/PT
- D-Link DSL-604T
- D-Link G3670B
- D-Link DSL-2640T
- D-Link DSL-G684T
- D-Link 2740B
- D-Link DIR-615 G2
- D-Link WBR-1310
- D-Link DSL-2543B
- D-Link DI-524
- D-Link DI-624+A
- TP-Link TD-8810 ADSL Modem/Router.
- Dynamode R-ADSL-C4-W-G1
- NetComm NB5Plus4 DSL
- Thomson TG580 DSL (only in Hex Dump mode)
- Asus RT-G31
- HuaWei EchoLife HG520 (Only some of them)
- TP-LINK TL-WR841N
- TP-LINK TL-WR841DN
- TP-LINK TL-MR342
- TP-LINK TL-WR340G
- TP-LINK TL-R460
- TP-LINK TL-WR741ND v2.0
- TP-LINK TL-WR700N
- TP-LINK TL-WR740N
- TP-LINK TL-WA801N
- TP-LINK TL-WR541G
- Belkin N+ (F5D8236uk4)
- Mercury MW54R
- Netgear DG632
Using RouterPassView
RouterPassView doesn't require any installation process or additional DLL files. In order to start using it, simply run the executable file - RouterPassView.exeAfter running RouterPassView, you can open your router configuration file by using 'Open Router Config File' option (Ctrl+O) or by dragging the config file from Explorer into the main window of RouterPassView.
If RouterPassView manage to detect and decrypt your router file, you should get a list of passwords/wireless keys in the main window of RouterPassView. If RouterPassView cannot detect your file, it'll remain empty.
Text Mode (Ascii and Hex Dump)
If RouterPassView shows you a list of passwords, but you can't find the password or other data that you need, you may try to locate your password by switching to Ascii Text Mode (F3) or Hex Dump Text Mode (F4).In these modes, RouterPassView decrypts the router file, but display it "as is" without analyzing the data stored in it.
Using the 'Grab Password From IE Window' option
If you try to recover your ISP/ADSL/L2TP/PPTP/PPPOE/DDNS password, but RouterPassView cannot decrypt the configuration file of your router, you still have a chance to retrieve the password by using this feature, assuming that you have the login password of your router. In order to use this feature, follow the instructions below.- Login into your router Web interface with Internet Explorer, and go to the password page that you wish to recover. This password page may look like this one:
As you can see in the above screenshot, the password field is filled with bullets, but if this password field really contains the password, RouterPassView will be able to extract it and display it on the main window. - Go to the File menu, and choose 'Grab Password From IE Window' or simply press Ctrl+G
- If the router Web page store the password in the password field, RouterPassView will display the hidden password:
Be aware that some routers deliberately store wrong password in this field, and in for these routers, RouterPassView won't be able to recover your real password.
